Wholesale 100%hemp long fiber yarn for hot selling clothing

Short Description:

After several drawing and doubling passages, the manufactured slivers are pre-spun roving yarns and according to quality and the desired yarn fineness, spun into Hemp yarn by wet or dry spinning processes. Although as Hemp is coarser than Flax, the pins on the board for drafting the combed fiber into a sliver needed to be set differently. The rove produced was then boiled in caustic soda to refine it and most of the yarn was bleached with hydrogen peroxide. As it is similar to Flax fibers, generally the best yarns are obtained by wet spinning. In which fibers are allowed to pass through a trough of hot water before being spun. This softens the Pectin allowing a greater drawing out and separation of the fibers and producing a finer yarn (greater than 12 Nm). Dry spinning is cheaper, producing yarns and fabrics with a different appearance and handle.  Using the above process two types of 100% Hemp yarn is made known as long yarn and short yarn.


Product Detail

Product Tags

40
41
42

Breathable, with a unique cool feeling, sweat does not stick to the body; Bright color, good natural luster, not easy to fade, not easy to shrink; Thermal conductivity, hygroscopic than cotton fabric, acid and alkali reaction is not sensitive, anti mold, not easy to be damp mildew, moth resistance, hemp fabric can adjust the temperature, but also anti-allergy, in winter can be anti-static, and especially suitable for patients can pass, can have the effect of resistance, and suitable for summer wear, very good hygroscopic

Cotton and linen (natural fiber) Silk and wool (protein fiber)

Cotton moisture recovery rate of 8.5%, hemp moisture recovery rate of 12%, wet stronger than dry

Applicable season (spring, summer and autumn)

Properties: Cooler, body temperature drops by 4 degrees while wearing linen

Flax is better at wetting

The product of flax basically does plain color product, pure flax product is high-grade product, more grave, more cultured

Hemp is 1.6 times stronger than cotton

Usage in textile industry

Mainly clothing, linen hosiery, embroidered base cloth, hemp rope, sacks, craft supplies, mainly according to the characteristics of flax to design products.

The origin of flax fiber, between 37 and 47 degrees north latitude, in line with this latitude, Jilin, Heilongjiang, Xinjiang (flax), Yunnan, Hunan (ramie, hemp). Now in the northeast and Xinjiang flax planting more and more people, the current policy support is less, foreign flax is mainly concentrated in Europe, the world's best flax in France (70-80%), Belgium, the Netherlands (good), the Czech Republic, Belarus (second) Egypt (worst)

European hemp, fiber strength is good, fiber length is long, good equipment on fiber damage is small, hemp rate is relatively high, good splitting. We can issue a European hemp certificate

The raw material we import is French rain and dew hemp. Supporting equipment advanced technology according to the output ranking, France's equipment is the best

Some other information about hemp

Retting degumming

Warm water degumming (smell has a bad smell), rain dew hemp (fragrance), cold water degumming, steam degumming, chemical degumming.

Cotton has standards, linen has no standards

Hemp does not pack white pack black, finished products are repair three silk repair out.

Bleached linen is used for high count yarn

Semi bleached hemp is the default for pure spinning, and unbleached hemp for blending

Raw materials need to humidify health: the moisture regain rate of flax fiber is low, the winding degree is insufficient, and can not be combed and spun directly. Therefore, many flax manufacturers need to provide a humidify health environment for flax fiber raw materials. This is the purpose of keeping in good health in order to improve flax fiber moisture regain, enhance the strength of the fiber, increase the rate of long hemp, fiber flexibility is good, and to eliminate the internal stress of fiber produced in raw, lubrication to the fiber surface, reduce the fiber in the later due to friction in the process of combing static electricity and the phenomenon of mutual exclusion between, between the fiber can also avoid the deterioration of the yarn quality, The splitting degree and spinnability of the fiber are improved

Yarn defects: oil yarn, long segments of bamboo, three silk unavoidable.

Cloth defects: Defects in stripes, hops, and stitches

With extended 2-3%

The price difference is mainly the origin of flax raw materials is not the same, there are differences in blending ratio. The density is different.

The 14s count yarns are divided into long, short and long yarns, and the price difference is quite large

Linen products are popular in clothing fabrics. With the gradual increase of people's income, consumers want to pursue nature more and more. Linen shirts and casual pants are more breathable, non-sticky, and have a better version

Key words: antibacterial, adjust temperature and humidity, version of good, natural, simple


  • Previous:
  • Next:

  • Write your message here and send it to us