OEM/ODM Manufacturer Dying Painting Machine - Hydraulic beam lifter and carrier – Singularity

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Our mission is to become an innovative supplier of high-tech digital and communication devices by providing value added design, world-class manufacturing, and service capabilities for Yarn Dyeing Machine Working Principle, Yarn Dyeing Machine Process, Cheese Dyeing Machine, Our final target is "To consider the most effective, To be the Best". Please experience cost-free to call with us if you have any prerequisites.

OEM/ODM Manufacturer Dying Painting Machine - Hydraulic beam lifter and carrier – Singularity Detail:

Application

YJC190D hydraulic heald frame beam lifting vehicle is auxiliary equipment to textile industry, mainly used to lifting beam and heald frame transporting also used for transporting beams in workshop. This machine trailing arm range can be adjusted among 1500-3000. Suitable to varieties beam transportation. This equipment set with four-wheel synchronous mechanism, convenient to operate.

Item	Range	Unit
Mini. Width of beam lifting channel	900	mm
Beam flange max. diameter	Φ800
Beam bearing diameter	Φ180
Distance between two bearing arms	1500——3000
Beam max. weight	1000	kg

This machine with foot pump provide power, easy to operate, greatly reduce labor strength, improve loom working efficiency. No contact with yarn when hoisting, and no damage to yarn, specially suitable to the loom wide in width.

Cloth storage, transportation and inspection trolley
Empty beam carrier

Technical parameters

Name		Data	Unit
Rated capacity		10000	N
Shaft arm center Lifting height	Highest	760	mm
	Lowest	300
Shaft arm length		480
LWH		5000×700×2000
Self-weight		700	kg

Hydraulic beam lifter
Hydraulic beam lifer

Structure features

1. This machine composed by frame, armshaft, four-wheel synchronization, manual pump, perform oil cylinder, compact structure, light weight, rotate the synchronization wheel 90º make the frame translation forward to the loom suitable place to loading or unloading beam.

2. Because of manual pump give power, arm shaft can stop when up to a certain point, and start to transport beam.

3. Installed reset closer spring at oil cylinder, arm can automatically return back to the lowest position quickly.

4. Appearance，seen the structure drawing

Usage

Push the machine to the front of loom beam, move arm shaft to adjust the two arm width suitable to beam bearing place, and adjust the position.

Counter-clockwise direction toggle lever to close control valve, continuous tread foot pump pedals to make pressure oil through actuating cylinder and arm shaft lifting beam.

Translation arm shaft vehicle return to the channel, switch operate handle to control synchronization wheel turn into channel forward direction and transport to the weaving room to place the beam.

Clockwise direction toggle the lever to open control valve from small to large, and then actuating cylinder at the unloading station. Arm shaft falling until beam flange to ground.

Note

1. Slowly control lever, do not make falling speed to fast in case of any accident.

2. Loading do not exceed rated value.

3. Every half yearn change filter hydraulic oil (30# mechanical oil) once, every quarter add filter oil once, adding oil anytime if the oil level too low, oiling quantity is 4/5 of oil tank height.

4. Strictly on guard against sundries and oil pollution get into oil pool.

5. Immediately stop manual pump when arm shaft lifting to the highest position, or it will damage machine part because of overloading.

Inspection result

S1	Main inspected	Content
1	Appearance inspection	Profile cutting edge should remove burrs weldment line tight and even Film color the same, should have no pockmark and scratch
2	Bearing capacity inspection	Hydraulic system should have no leakage and fracture under the rated capacity. Arm shaft can stop at any point in the travel range.
3	Driving under heavy loading	Under rated capacity, vehicle move forward, backward, turn right and left freely, each wheel rotary flexible . Easy to operate, synchronization wheel running flexible.
4	The height of the middle of the Arm shaft	1. highest not less than 760mm 2. lowest not less than 350mm
5	Route start point to end point foot pump time	25times

Product detail pictures:

Related Product Guide:

No matter new buyer or old purchaser, We believe in long expression and trusted relationship for OEM/ODM Manufacturer Dying Painting Machine - Hydraulic beam lifter and carrier – Singularity , The product will supply to all over the world, such as: Latvia, Kazakhstan, Mauritania, We have now a large share in global market. Our company has strong economic strength and offers excellent sale service. Now we have established faith, friendly, harmonious business relationship with customers in different countries. , such as Indonesia, Myanmar, Indi and other Southeast Asian countries and European, African and Latin American countries.

Dying Painting Machine